Rear Shocks (Suspension Units)

We have a wide range of Hagon and Girling rear shocks and suspension units available

Girling Suspension Units History

The well known oil filled Girling shocks were commonly used on most British motorcycles. They were later replaced by Gas Filled Shocks. The Girling factory was on King's Road, Birmingham.

Burton Bike Bits carry some Genuine Girling Suspension Units and Springs.

Girling Replicas

11.4" Girling Replicas

Part Number	Description	Model/Year
19-7417	Shrouded Rear Shocks Non Adjustable 3/8" Top Bush 1/2" Bottom Bush	BSA Bantam D7/D10/D14 1958 on
Can Replace SC3/204	Shrouded Rear Shocks Non Adjustable 3/8" Top Bush 1/2" Bottom Bush	Triumph Tiger T20

As Original 13.4"

Part Number	Description	Model/Year
68-4224	Shrouded	A50/A65/'62 '63
19-7418	Shrouded	A50/A65/'64-'68
19-7438	Chrome spring + Top Covers, Genuine Girling Springs	A65L/S/1968
19-7440	Chrome Spring only, Genuine Girling Springs	A65F/1968
19-7448	Chrome Spring only, Genuine Girling Springs	A65/1969-70

11.9" Girling Replica

Part Number	Description	Model/Year
GR64053946	Covered in, complete with Chrome Springs (132lb)	Triumph 3TA/5TA/T100A 1959-67
GR/650539116N	Covered in, complete with Genuine Girling Chrome Springs (64543764, 132lbs)	Royal Enfield Interceptor MK1 1964-66
W49557A	Covered in, complete with Genuine Girling Chrome Springs (64543764, 132lbs)	Royal Enfield Interceptor MK1A/MK2
W49558A	Chrome Spring, complete with Genuine Girling Chrome Springs (64543764, 132lbs)	Royal Enfield Interceptor MK1A, GT90
06-7865 NM24036	Covered in, Shrouded(110lbs)	Norton Slimline Models 1960on (Dommie 88/99, 650SS, Atlas)
60096	Fully Shrouded, 3/8 " Bushes (110lbs)	Ariel Heavy Weight (1952-59)
60097	Fully Shrouded, 3/8 " Bushes (90lbs)	Francis Barnett/Greeves etc.

12.2" Girling Replica

p/n 02-4180, Fully shrouded with 110lbs spring rate, length 12.2", complete with bottom alloy yoke & polished alloy collets.

Available for AJS, Matchless

12.9" Shrouded Type

Available for AJS, Matchless (1965 on, G3, G80, G12, G15)

Fitted with 110lb spring and 3/8" bushes top and bottom.

12.9" Shrouded Type

Available for the following Models:

BSA -         B31, B32, B33 , B44, A7, A10
Norton-     88, 99, Model 50, ES2, All Widelines Pre 1960
Triumph-   Pre-Unit 6T, T120, TR6, Unit T100, T120

13.2" Shrouded Type

Velocette - MSS, Viper, Venom, Clubman, Endurance (MAS33/6)

Woodhead Replicas - Woodhead Suspension units were originally manufactured by Jonas-Woodhead and Sons ltd, Leeds. We supply replicas of the original.

MSS, Viper, Venom, Clubman, Endurance (MAS33/4) c/w top bushes

Genuine Girling Suspension Springs
This Is Just A Small Selection Of Our Stock!

Part Number	Models
GR9054/58	James K7/ C / T / K12 / L25T /S Matchless G2 / Ariel BSA C15 / B40
GR9054/59	BSA CB / DBD / Ariel
GR64543626	B50MX / TR5W
GR64545350	A6501F '71
GR64543735	A50 / A65
GR64543764	Yamaha XS1 / XS2 T100 '60-68
GR64541788	RE250

Hagon Shock Absorbers

Hagon Shock Absorbers History

Hagon Products was created in 1958 by ex-British Grasstrack Champion Alf Hagon. The company produced competition frames.

Hagon Shocks can be used to replace the original Girling Shocks.

Available - 11.4", 11.9", 12.4", 12.9", 13.4" Chrome Open Spring Type

BSA- C15, B40, B25, B44, B50, A50, A65, A70
Norton- Dommie, Atlas, Commando's
Royal Enfield - 250cc, 350cc, 500cc, 700cc, 750cc
Triumph- Late T20's, 3TA, 5TA, T100, TR5T, T120, TR6, 6T, T140,TR7, T150,T160, X75

Shroud Set (Girling Type)

Shroud Set (Hagon Type)